Filter
Top Products
6-7
● Message key function (when variable parameter PA03 is set to 0)
Cycles through the message panel displays.
• When CH1 is displayed: Display C1, display C2, display C3, display C4,
display C5, display C6, display C1.
• When CH2 is displayed: Display C1, display C2, display C3, display C4,
display C5, display C6, display C1.
Handling Precautions
•Models with CP computation compensation the CH2 PV values have
the following meaning depending on variable parameter PA44 settings.
•
When PA44 is set to 0: CP value (unit: %) or PO2 values (unit 10
-20
atm)
• When PA44 is set to 1: millivolt voltage value (unit: mV)
• When PA44 is set to 2: O2 sensor impedance value (unit: kΩ)
■
■
■■ ■
■■■
■■■■■■■
Chapter 6. OPERATION
● Display C1
● Display C2
● Display C3
● Display C4
● Display C5
● Display C6
● Display C7