Filter
Top Products
12-9
● Display test (00-02)
Press SETUP key until the PROG/SEG display shows (00-02).
Then, each 7-segment LED, LED indicators and LCD illuminates at every 1 sec.
This is to check if each LED/LCD illuminates.
● Digital input test (00-03)
Press SETUP key until the PROG/SEG display shows (00-03).
When you turn on or off each remote switch, the upper display will show the data
described in Table 12-5.
Table 12-5. DI
0.0.0.0.
0.0.0.1.
0.0.0.2.
0.0.0.4.
0.0.0.8.
0.0.1.0.
0.0.2.0.
0.0.4.0.
0.0.8.0.
0.1.0.0.
0.2.0.0.
0.4.0.0.
0.8.0.0.
1.0.0.0.
2.0.0.0.
4.0.0.0.
8.0.0.0.
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
↕
Chapter 12. CALIBRATION