Honeywell DCP552 Mark II Network Card User Manual


 
5-36
Auxiliary output
Auxiliary output 1
Auxiliary output 1 is processed as shown below by a model with one or two
auxiliary output channels.
Auxiliary output 2
Auxiliary output 2 is processed as shown below on a model with two auxiliary
output channels.
Chapter 5. FUNCTIONS
Auxiliary output 1 type
Setting: setup data C45
Setting: setup data C46, C47
4mA
¥When the auxiliary output type is SP
or deviation in the READY mode.
Auxiliary output 1
Current output 4 to 20mA
Upper and lower limit scaling
Auxiliary output 2 type
Setting: setup data C48
Upper and lower limit scaling
Setting: setup data C49, C50
4mA
¥When the auxiliary output type is SP
or deviation in the READY mode.
Auxiliary output 2
Current output 4 to 20mA