Filter
Top Products
2-6
■ Key chord functions
PROG + RUN/HOLD : Reset key
Press the RUN/HOLD key while holding down the PROG key in basic status
display to perform a RESET.
The READY mode is invoked when a reset is performed in the RUN, HOLD,
FAST, END, or READY FAST modes. This RESET operation does not work
in the READY mode.
PROG + DISP : Advance key
Press the DISP key while holding down the PROG key in the program run mode
in basic status display to perform an ADV (advance) operation. The next segment
is displayed when this action is performed in the RUN, HOLD, FAST, or
READY FAST modes. This ADV operation does not work in the READY mode.
FUNC + → : Fast key
Press the → key while holding down the FUNC key in the program run mode
in basic status display to perform a FAST operation.
The system changes from the RUN or HOLD mode to the FAST mode. If the
system is in the READY mode, it goes to the READY FAST mode.
Chapter 2. NAMES AND FUNCTIONS OF PARTS