Filter
Top Products
5-13
•Timed code event
This function is a combination of a code event and a time event. The set code
value is output at the set time. The number of settings that can be made in the first
segment is the same as the number of output points. For example, for a 3-point
output up to three settings can be made in the first segment.
Like a time eventit, a setting within the segment period is valid and those that
exceed it are ignored. When the program reaches the start time of the first
segment or a new segment, the set code value is 0 (all points off) until the set time
of the time event.
Chapter 5. FUNCTIONS
Segment
Set value
Code value
1 in event 3
Code value
2 in event 4
Code value
4 in event 5
Output code
12 543
Not set 5 3 Not set 6 0
OFF
ON ON
OFF OFF OFF
OFF
OFF
OFF
ON
OFF
0
OFF,OFF,OFF
0, 0, 0
5
*1
3
OFF,OFF,OFF
0, 0, 0
0
*3
0
OFF,OFF,OFF
0 , 0, 0
Set time Not set 0.00 0.10 Not set 0.30 0.00
Time
0.10
0.30
OFF
OFF OFF
ON
ON
OFF OFF OFF
ON
3
*2
6
*4
Example
: Setting a timed code with 3 output points in event 3
*1:
ON,OFF,ON
1, 0, 1
*2:
OFF,ON,ON
0, 1, 1
*3:
OFF,OFF,OFF
0, 0, 0
*4:
ON,ON,OFF
1, 1, 0
The table below shows the output state when a value of 5 is set in segment 2 and set to start at the
beginning of the segment, a value of 3 is set to occur 0:10 after the start of segment 2 and a value
of 4 is set to occur 0:30 after the start of segment 4.