Filter
Top Products
12-16
● Writing into EEPROM
(1) Press SETUP key until the PROG/SEG display shows (06-09).
Scroll ↑, ↓, ←, →, keys to show (1.1.1.1.) on upper display.
(2) Press ENTER key.
■ Carbon potential code calibration
Scroll ↑, ↓, ←, →, keys to show (7.0.7.7.) on upper display, then press ENTER
key.
● Carbon potential code calibration
Press SETUP key until the PROG/SEG display shows (07-01).
Scroll ↑, ↓, ←, →, keys to show (x.x.x.x.) on upper display, then press ENTER
key (See Table 12-11).
● Writing into EEPROM
(1) Press SETUP key until the PROG/SEG display shows (07-02).
Scroll ↑, ↓, ←, →, keys to show (1.1.1.1.) on upper display.
(2) Press ENTER key.
Table 12-11. Carbon Potential Code
0.0.0.0.
0.0.0.1.
Chapter 12. CALIBRATION