Filter
Top Products
9-7
Chapter 9. MEMORY CARD OPERATIONS
■ Card battery alarm panel
When the voltage of the internal battery in a RAM card is too low, the data saved
on the disk may be corrupted. Loading corrupted data onto the DCP552 will
cause maloperation. Do not use a card whose battery voltage is too low. If you
want to load the data anyway, select “Ignore” in this panel and press the ENTER
key. This displays the load menu. To return to the normal display mode, select
“Quit” or press the ENTER key or the DISP key.
■ Procedures for loading individual programs
This procedure loads single memory card files on the DCP552.
↑ ↓, ← →
↑ ↓, ← →
↓
←, →