Filter
Top Products
Hardware and Endpoints
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Page 86 ITP and SIP Feature Exceptions
ITP and SIP Feature Exceptions
Some endpoints cannot fully support certain features due to hardware or software restrictions.
These exceptions are listed below by endpoint type.
Model 8600: The Model 8600 phone operates in ITP or SIP mode. However, it does not sup-
port the following features (feature code) in either mode:
• Feature Button Default (395)
• Microphone Mute On/Off (314)
• Program Buttons (397)
• Review Buttons (396)
• Switch Keymap (399)
Model 8690: The Model 8690 phone operates in ITP or SIP mode. However, the phone does
not support the following features (feature code) in either mode:
• Change Language (301)
• Feature Button Default (395)
• LCD Contrast Control (303)
• Program Buttons (397)
• Review Buttons (396)
• Switch Keymap (399)
Models 8664, 8665, and 8668: The Model 8664, 8665, and 8668 wireless IP phones operate in
ITP mode. However, they do not support the following ITP features (feature code):
• Automatic Intercom Access On/Off (361)
• Automatic Line Access On/Off (360)
• Background Music On/Off (313)
• Change Language (301)
• Group Listen (312)
• Handsfree On/Off (319)
• Headset On, Headset Off, Headset On/Off (315, 316, 317)
• LCD Contrast Control (303)
• Page Receive On/Off (325)
• Switch Keymap (399)
Model 8601: The Model 8601 operates in SIP mode only. However, it does not support the
following SIP features (feature code):
• Headset On, Headset Off, Headset On/Off (315, 316, 317)
• LCD Contrast Control (303)
• Show IP Address (300)
Feature Codes: The two feature codes in the table below function differently, depending on
the mode the phone is operating in.
Table 12:
Feature Codes with Different Meanings for ITP and SIP Modes
FEATURE NAME
FEATURE
CODE
ITP MODE SIP MODE
Show IP Address
Display Time/Date 300
Displays the system
date and time, user-
name, and extension.
Displays the IP
address of the phone.