Filter
Top Products
System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Placing a Conference Call
Page 203
Placing a Conference Call
To place a conference call while on a call with an Inter-Tel phone:
1. Press the button, or press the Special button and enter the Conference feature
code (5). The party is on conference wait hold (hears music) and the button
flutters. The display shows CALL NEXT PARTY TO CNF.
To place a conference call while on a call with a single line phone:
1. Hookflash and enter the Conference feature code (5). The party is on conference wait
hold (hears music).
2. Place an intercom or outside call to another party (or return to a call on hold) to be
included in the conference. Users of Executive and Professional Display phones and
Model 8560 phones can press the IC DIRECTORY or OUTSIDE DIR menu buttons to
look up numbers, if desired..
To place the party on conference wait hold with an Inter-Tel endpoint:
Press the button again. Or, press the Special button and enter 5 again.
To place the party on conference wait hold with a single line endpoint:
Hookflash and enter the Conference feature code (5). The party is on conference
wait hold (hears music).
3. Repeat step 2 until all desired parties are on conference wait hold (or the maximum
allowed number has been reached).
4. Connect all waiting parties in the conference:
To connect all waiting parties in the conference with an endpoint that has menu
buttons:
Press the
CONNECT TO CONFERENCE menu button. All parties are connected.
The display shows CNF IN PROGRESS. The CNF button and a Call button flash
slowly. Use the following menu buttons:
HOLD: Press this button to place the conference on hold.
DISCONNECT: Press this button to remove your endpoint from the conference.
If there are no other endpoints in the conference, all parties are disconnected. If
there is still another endpoint in the conference, the parties remain connected.
ADD PARTY: This button appears only if you have not reached the maximum
number of allowed parties. Press this button to leave the conference parties con-
nected while you place another call to be added to the conference.
MUTE: Press this button to switch the microphone on or off during the confer-
ence.
TRANSFER CNF: Press this button and enter an extension number to transfer
the conference to another endpoint or the Voice Mail application.
To connect all waiting parties in the conference with another type of Inter-Tel
endpoint:
Press the button again. Or, press the Special button and enter again.
All parties are connected. Display endpoints show CNF IN PROGRESS. The
button and a Call button flash slowly.
NOTE An existing conference is not a valid “party” for another conference.
CNF
CNF
CNF
CNF
5
CNF