Filter
Top Products
System Features
INTER-TEL
®
CS-5200/5400 ADMINISTRATOR GUIDE, ISSUE 1.1 – August 2005
Class of Service
Page 159
02 Deny Area/
Office
This restriction is divided into eight user groups to allow the use of
varying area/office code restriction tables. This is useful for reduc-
ing restrictions for some of the endpoints, applications, or trunk
groups while increasing restrictions for others. Each endpoint,
application, and trunk group is assigned a day mode and a night
mode user group in Database Programming. Within each user
group, area codes can be designated as restricted, allowed, or
extended. Restricting an area code prevents users from placing
calls to that area code. Allowing an area code allows all office
codes within that area code. Designating an area code as
extended allows the programmer to determine which office codes
(up to 800) are allowed or restricted within that area code.
03 Deny
Operator
Calls to operator numbers are restricted.
04 Deny Toll
Access
Calls to numbers containing a toll string (defaults to 1) are
restricted.
05 Deny
International
Calls to international numbers are restricted.
06 Deny Equal
Access
Calls that begin with equal access digits (10XXX or 101XXXX) are
restricted.
07 Deny Local
Calls
Calls to local numbers are restricted.
08 Denied
Numbers
Calls to programmed “denied” numbers (defaults to
1900NXXXXXX+ and 976XXXX+) are restricted.
09 Allowed
Numbers
Calls to programmed “allowed” numbers (defaults to
1800NXXXXXX+) are allowed, even if number also matches a dial
pattern in a restricted class of service that is assigned to the end-
point, application, or trunk group being used.
Table 25. Class of Service Default Values(Continued)
COS NAME RESTRICTION