Filter
Top Products
19
Explanation of Screen
2
FUNCTIONS
2.4.2 System list
The system list is displayed with the system setting screen when starting FR Configurator.
The model name and station number set with the system setting are displayed on the list.
The inverter (station number) selected on the system list becomes active on thez parameter setting screen or alarm display
screen.
When the system list window is closed, select [System list] of the [Display] menu to display again.
No. Name Function and description
B
Station number
selection
Selects a station number to be displayed on the screen using the / button. (Only station number set
with the system setting is displayed in the displaying column.
Direct enter of displaying column is also available.
C
Operation mode
button
Sets the operation mode by clicking each button.
The set operation mode is displayed in the displaying column of operation mode.
Valid only when the online button is in the status.
• [EXT] (Alt+X): External operation mode
• [PU] (Alt+U): PU operation mode
• [LNK] (Alt+L): Network operation mode
D
Operation mode
indication
• EXT: External operation mode
• PU: PU operation mode
• LNK: Network operation mode
• EXT JOG: External JOG operation mode
• PU JOG: PU JOG operation mode
• PU+EXT: External/PU combined operation mode
• No Node: when the time-out occurs in the ONLINE mode
E
Online button Switches Offline and Online by clicking. Pressing [Alt] key and [o] key can also switch Offline and Online.
...Online
...Offline
REMARKS
• The operation mode + alarm (warning) descriptions are displayed at the alarm occurrence or during the
warning indication. Displayed in red letters at the alarm occurrence.
Example: When the overcurrent shut-off during acceleration occurs during PU operation ... PU (OC1)
When PU stop occurs during EXT operation ... EXT (PS)
•
At the occurrence of communication error such as NAK or the occurrence of inverter error such as out of
parameter range, error codes are displayed.
(page 70)