Filter
Top Products
43
Monitoring Inverter Status [Monitor]
2
FUNCTIONS
2.8 Monitoring Inverter Status [Monitor]
Selecting the [Data Display], [I/O Terminal Monitor], [Oscilloscopes], or [Status Monitor] command in the [Monitor] menu
allows you to select the corresponding monitor item.
2.8.1 Displaying monitor data on analog meter [Data Display]
Data Display shows up to four different signals as meters in real time. The meter displays handle only data which can be
indicated by meter deflections.
Selecting the [Data Display] command in the [Monitor] menu or selecting the tool button
shows the following screen:
The meter scales are automatically adjusted. After the parameters are batch-read, they are set to the optimum values.
CAUTION
Using Monitor/Oscilloscopes function with FA transparent function may not exhibit the best performance, and may reduce
the response level.
When quick response is required, directly connect the inverter with FR Configurator and not connect via GOT.
No. Name Function and description
A
Node
Station number of the inverter which to be monitored can be selected.
B
Monitor item
Monitor items can be selected.
C
Meter display Shows monitor values on the analog meters.
The present value is indicated by the black pointer and the maximum value by the red
pointer.
D
Meter full-scale
Shows the full-scale value of the meter display. It can be changed by entering a new value.
E
Max Val/Present Val
Maximum value and present value can be checked in numerical value.
F
Hold Clicking the [Hold] button holds the data being monitored.
The data can be also saved in this state.
Click this button during the hold to cancel the hold.
G
Start/Stop
After switching to , click the [Start] button to start monitoring.
Click this button during the monitoring to stop monitoring.
Present Val.
Max Val.
C
D
E
FG
E
A
B