Filter
Top Products
42
Parameter Setting [Parameter]
Conversion procedure by selecting an inverter connected.
(1) Press the [ONLINE] button to display .
(2) Check "Select the connected VFD" and select the station
number from a list.
(3) Clicking reads the parameters of inverter
connected and displays the parameters as a list.
Input a new value in the Set Value column to change the
parameter setting value.
REMARKS
When is selected, change it to .
(4) Select the model of target inverter setting.
(Only models convertible with FR Configurator are
selectable)
(5) Click to display the parameter conversion result as a list.
Input a new value in the Set Value column to change the parameter setting value.
(6) Click to save the conversion result in the
parameter file (PRM).
(7) Display the All List Format or the Functional List Format,
and select the target inverter.
(8) Open the saved parameter file (PRM). Press the [ONLINE]
button to display
and click .
The parameter setting value is written in the inverter and
conversion is completed.
(9) For parameters completed in error, set them manually
again if required.