Filter
Top Products
44
Monitoring Inverter Status [Monitor]
2.8.2 Monitoring the status of I/O terminal [I/O Terminal Monitor]
Selecting the [I/O Terminal Monitor] command in the [Monitor] menu and selecting from the list allows you to monitor the
status of the inverter I/O terminal. Also, terminal functions can be assigned.
No. Name Function and description
A
Inverter input
terminal monitor
Monitors the input terminal status. The status is displayed as ON/OFF beside the terminal name.
Click to assign the function to the corresponding input terminal after selecting the signal name from
the list.
The terminal whose signal has been changed from the initial value is displayed in green.
B
Inverter output
terminal monitor
Monitors the output terminal status. The status is displayed as ON/OFF beside the terminal name.
Click to assign the function to the corresponding output terminal after selecting the signal name from
the list.
Checking the check box sets to negative logic.
The terminal whose signal has been changed from the initial value is displayed in green.
C
FR-A7AR
terminal monitor
Monitors the FR-A7AR terminal status. The status is displayed as ON/OFF beside the terminal name.
Click to assign the function to the output terminal of the corresponding plug-in option (FR-A7AR) after
selecting the signal name from the list.
(When the plug-in option settings have not yet been made by system settings, the setting cannot be changed.)
The terminal whose signal has been changed from the initial value is displayed in green.
D
FR-A7AY
terminal monitor
Monitors the FR-A7AY terminal status. The status is displayed as ON/OFF beside the terminal name. Click
to assign the function to the output terminal of the corresponding plug-in option (FR-A7AY) after
selecting the signal name from the list.
Checking the check box sets to negative logic.
(When the plug-in option settings have not yet been made by system settings, the setting cannot be changed.)
The terminal whose signal has been changed from the initial value is displayed in green.
E
FR-A7AX
terminal monitor
Monitor the FR-A7AX termianl status. The terminal is displayed in yellow when the signal is ON.
F
Allocation /
Monitor
When changing the signal, click to change to "I/O Terminal Allocation" screen. Refer to page 36 for "I/
O Terminal Allocation". Click to return to "I/O Terminal Monitor" screen and the signal monitoring can
not be made.
G
Monitor start /
Monitor stop
Click to start monitoring. The status of signal is displayed as ON/OFF beside the terminal name.
During the monitoring, the button becomes , and clicking this stops monitoring.
A
B
C
D
F
G
E