Filter
Top Products
41
Parameter Setting [Parameter]
2
FUNCTIONS
Conversion procedure from parameter file
(1) Check "Convert from the parameter file" in "Set VFD from
which conversion is made" section and select the parameter
file (PRM) of source inverter saved with inverter setup
software (FR-SW0-SETUP/FR-SE1-SETUP).
(2) Click .
When it is fixed, the parameters of selected parameter file
are displayed as a list.
Input a new value in the Set Value column to change the
parameter setting value.
(3) Select the model of target inverter.
(Only models convertible with FR Configurator are
selectable)
(4) Click to display the parameter conversion result as a list.
Input a new value in the Set Value column to change the parameter setting value.
(5) Click to save the conversion result in the
parameter file (PRM).
(6) Display the All List Format or the Functional List Format, and
select the target inverter.
(7) Open the saved parameter file (PRM). Press the [ONLINE]
button to display
and click .
The parameter setting value is written in the inverter and
conversion is completed.
(8) For parameters completed in error, set them manually again
if required.
Click to select the file.