Filter
Top Products
58
Test Running
2.10 Test Running
2.10.1 Test Running
Selecting the [Test Running] command from the [Test Running] menu or the tool button displays the following screen.
Operation procedure
(1) Set the station number of the inverter to be run and the operation mode (PU or LNK (Link) operation).
Set the PU or LNK (Link) operation by the connection method of the inverter and personal computer. (Refer to page 21)
(2) Enter the running frequency and press the key to set.
(3) Click the [JOG FWD] (Shift+F5) or [JOG REV] (Shift+F6) button. The motor rotates while the button is being pressed.
The output frequency, output voltage and output current are monitored on the screen.
CAUTION
This command can be chosen in the online mode only.