Filter
Top Products
32
Parameter Setting [Parameter]
(3) CA terminal calibration (FR-A700-EC/CH, FR-F700-EC/NA/CH)
The dedicated adjustment screen is used for the calibration of the Current output bias/gain signal/current (Pr. 930, Pr. 931).
Press the [Click] button in the parameter list to show the Current output bias/gain signal/current setting panel.
The Current output bias/gain signal/current setting is enabled during the ONLINE mode only.
<Setting method>
1) Set to the ONLINE mode.
2) Press the [Click] button in Pr. 930, Pr. 931 Current output bias/gain signal/current panel.
3) Choose the Adjustment method from 2 Adjustment method check button.
(a) Set the output signal value
Check "Set the output signal value" and input setting signal value.
(b) Set the current value
Check "Set the current value", input Setting signal value and Setting current value.
4) Press [OK] button to write the calibration value to the inverter. To cancel the calibration, press the [Cancel] button.