Filter
Top Products
36
Parameter Setting [Parameter]
2.7.5 Allocating functions to I/O terminals of the inverter [I/O Terminal Allocation]
Selecting the [I/O Terminals Allocation] command on the [Parameter] menu or the tool button selects the I/O terminals
from the list and allows to change or assign the functions of the inverter I/O terminals to them.
No. Name Function and description
A
Inverter input terminal function
selection
Selects the signal name from the list and assigns the function to the corresponding input
terminal.
B
Inverter output terminal function
selection
Selects the signal name from the list and assigns the function to the corresponding output
terminal.
Checking the check box sets to negative logic.
C
FR-A7AR terminal function
selection
Selects the signal name from the list and assigns the function to the output terminal of the
corresponding plug-in option (FR-A7AR).
(When the plug-in option settings have not yet been made by system settings, the setting
cannot be changed.)
D
FR-A7AY terminal function
selection
Selects the signal name from the list and assigns the function to the output terminal of the
corresponding plug-in option (FR-A7AY).
Checking the check box sets to negative logic.
(When the plug-in option settings have not yet been made by system settings, the setting
cannot be changed.)
E
Monitor/Allocation
When monitoring the signal, click to change to "I/O Terminal Monitor"
screen. Refer to page 44 for "I/O Terminal Monitor".
Click to return to "I/O Terminal Allocation" screen and the signal monitoring
can not be made.
A
E
F
B
C
D