Nortel Networks AN/DC Network Card User Manual


 
Installing and Operating AN/DC and ANH-8/DC Systems
4-12
312410-A Rev 00
Removing a Flash Memory Card
When you remove a formatted memory card, the NVFS automatically removes
access to the card. When you insert and format a card or insert an already
formatted card, the NVFS automatically provides access.
To remove a memory card from an AN/DC or ANH-8/DC:
1.
Press the eject button adjacent to the card receptacle on the front panel.
Figure 4-8
shows the eject button on an AN/DC. Figure 4-9 shows the eject
button on an ANH-8/DC.
Figure 4-8. AN/DC Flash Memory Card Eject Button
Figure 4-9. ANH-8/DC Flash Memory Card Eject Button
2.
To insert another card into the receptacle, refer to “Installing the Flash
Memory Card” in Chapter 3.
Caution:
Do not remove the Flash memory card while the router is operating,
as this will interfere with current networking operations.
RUN
BOOT
DIAG
POWER
Eject
button
AN0026A
Eject
button
AN0057A