Nortel Networks AN/DC Network Card User Manual


 
Using Local Boot (the Quick-Start Procedure)
312410-A Rev 00
B-9
Wide Area Protocol Worksheets
This section contains requested information and possible options relating to wide
area protocol choices on the Global Information Worksheet.
Nortel Networks Proprietary PPP Worksheet
Requested Information Options Your Information
Enter BOFL (Breath of Life)
timer value (1-60) [5]:
Enter the maximum amount of
time that can elapse between the
successful transmission of BofL
messages.
Enter Local Address
Selection [3]:
1. DCE
2. DTE
3. EXPLICIT
Note:
Reverse local and remote
address values when configuring
the device at the other end of the
circuit. (Exception: When
connecting to a Series 5 router
that uses DCE/DTE addressing,
use the SAME local address
value.)
Frame Relay Worksheet
Requested Information Options Your Information
Enter Management type [3]:
1. DLCMI None
2. Rev 1 LMI
3. ANSI T1 617D
4. CCITT Annex A
5. LMI Switch
6. Annex D Switch
7. Annex A Switch
Enter addressing type [4]:
1. ADDR Q.921
2. ADDR Q.922 (MARCH ’90)
3. ADDR Q.922 (NOVEMBER ’90)
4. ADDR Q.922