Filter
Top Products
Using Local Boot (the Quick-Start Procedure)
312410-A Rev 00
B-5
Router Protocol Worksheets
This section contains requested information and possible options relating to the
routing protocol choices on the Global Information Worksheet.
RIP Worksheet
Requested Information Options Your Response
Should RIP listen to the
default route? (y/n) [n]:
y(es)
n(o)
Note:
RIP listens to a specific
network or subnet route where
Site Manager is located.
Answering y(es) to this request
forces RIP to also listen to the
default route (0.0.0.0). This is
useful when no specific route is
available in the RIP updates that
the router receives.
OSPF Worksheet
Requested Information Options Your Response
Enter the OSPF router ID in
dotted decimal notation [the
router provides the IP
address of the COM port]:
Enter an IP address to uniquely
identify the router in the OSPF
domain.
We suggest using the default IP
address provided.
Enter the OSPF area ID in
dotted decimal notation
[0.0.0.0]:
Enter the area ID. This ID must
match the area ID of the router’s
neighbor.
Note:
The backbone area ID is
always 0.0.0.0.
Enable Simple Password
authentication? (y/n) [n]:
y(es)
n(o)
Note:
If you answer y(es), the router
requests a password.
Password:
______________
(continued)