Filter
Top Products
312410-A Rev 00
B-1
Appendix B
Using Local Boot (the Quick-Start Procedure)
You can local boot the AN/DC or ANH-8/DC using the Site Manager Quick-Start
procedure explained in this appendix. You need this information to complete the
procedure in “Continuing with Local Boot” on page 3-15 .
The Quick-Start procedure is the initial configuration that starts a Nortel
Networks router running on the network. The procedure enables the Internet
Protocol (IP) so that the router can connect to Site Manager.
Quick-starting basically consists of running the install.bat script and entering
information at the prompts. The router automatically selects options for some
prompts, and you can accept default values for many of the other prompts.
To assist you in answering Quick-Start prompts, we have included a series of
worksheets for you to fill out with your network administrator’s help. These
worksheets contain all of the options that appear at each prompt, and space for
you to record the options you select.
The last two sections in this appendix, Using the Quick-Start Commands
” and
Running the Quick-Start Script
,” provide additional information about the
Quick-Start procedure.
It is very important that you fill out the worksheets and read all sections of this
appendix before you begin the Quick-Start procedure.
Note:
Contact your network administrator for assistance in selecting
worksheet options.