Nortel Networks AN/DC Network Card User Manual


 
Installing the ANH-8/DC
312410-A Rev 00
2-19
Connecting an ISDN Cable
Connect an ISDN BRI cable to the back of the ANH-8/DC:
1.
Plug the ISDN cable into the ISDN-BRI connector (Figure 2-14).
Figure 2-14. Connecting an ISDN BRI Cable
2.
Connect the other end of the cable to the ISDN communications device.
Note:
This section does not apply unless you have upgraded the ANH-8/DC
with an ISDN Basic Rate Interface module.
Synchronous Cables
COM 1
COM 2COM 3/Expansion
ISDN-BRI
ISDN BRI
Cable Connector
AN0049B
RTN -VDC
-48VDC
-60VDC
1.5A