Filter
Top Products
Installing and Operating AN/DC and ANH-8/DC Systems
1-2
312410-A Rev 00
1.
Inspect all items for any shipping damage.
2.
Make sure that your shipping package contains the following items:
• Mounting hardware (Figure 1-1)
.
• Console/modem cable kit (Figure 1-2)
.
• Any network cables ordered with the router. If you do not have the
appropriate network cables, contact your network administrator.
• Warranty information.
• This guide.
Figure 1-1. Mounting Hardware
Caution:
In particular, check the AN/DC for any damage to the ports on the
back panel. If you detect damage, do not install the AN/DC. Call your local
Nortel Networks Technical Response Center.
Four rubber feet
(for installing the AN in an
equipment rack or
mounting it on a wall)
Two flange backets
Four cagenuts with screws
(for installing the AN in an
equipment rack)
2 wall anchors
(for mounting the AN on a wall)
AN0001A