Nortel Networks AN/DC Network Card User Manual


 
Installing and Operating AN/DC and ANH-8/DC Systems
B-4
312410-A Rev 00
3
Enter IP address in dotted
decimal notation:
Enter the IP address for the COM
interface.
Enter the subnetwork mask in
dotted decimal notation:
Enter the subnetwork mask for the
COM interface IP address.
Is the router connected to
the same local area network
as the Site Manager
workstation?
(y/n) [n]:
y(es)
n(o)
Press the Return
key.
Enter routing protocol
number [1]:
1. RIP
2. OSPF
3. Static Route to Site Manager
(Complete the
worksheet for the
protocol you
select.)
Enter wide area protocol
number [1]:
1. Nortel Networks Point-to-Point
Protocol (Proprietary)
2. Frame Relay
3. Point-to-Point Protocol (PPP)
Standard
4. Switched Multimegabit Data
Service (SMDS)
(Complete the
worksheet for the
protocol you
select.)
Do you wish to set
SNMP community management?
(y/n) [n]:
y(es)
n(o)
Setting up SNMP community
management is optional.
4
TFTP default volume [1]:
The script automatically assigns
the TFTP default volume to “1.”
None
5
Do you want to enable
TELNET? (y/n) [n]:
y(es)
n(o)
Enabling TELNET is optional.
6
FTP default volume [1]:
The script automatically assigns
the FTP default volume to “1.”
7
Do you wish to save this
configuration to a file?
(y/n) [y]
y(es)
n(o)
Press the Return
key.
Enter filename [
startup.cfg
]:
We recommend using the default
filename.
Press the Return
key.
Global Information Worksheet
(continued)
Step Requested Information Options Your Response