Filter
Top Products
Installing and Operating AN/DC and ANH-8/DC Systems
3-8
312410-A Rev 00
Figure 3-5. Logging In to the Diagnostic Monitor
6.
Type the following command at the login prompt and press the Return
key:
Manager
Note that you must type Manager
with an uppercase “M.”
The Diagnostic Monitor command line prompt appears (Figure 3-5)
. You are
now using the Diagnostic Monitor.
7.
To use the Netboot, Directed Netboot, or the Local Boot option, refer to
the specific section that describes the procedure you want to use.
• Continuing with Netboot
• Continuing with Directed Netboot
• Continuing with Local Boot
AN Diagnostics: Version - 6.01 - Mon July 24 07:54:00 EDT 1996
Login: Manager
AN Diagnostics: Version - 6.01 - Mon July 24 07:54:00 EDT 1996
MOD ID = 0x40D (1037) Rev = 01 S/N = 015693
Flash = 4MB Memory = 4MB
AN_DIAG>>
TEST 00F Sync Port2 Int Loop RX Chain Test -------
TEST 00E Sync Port2 Int Loop TX Chain Test ------- PASSED
Control-c
invoked
AN00063A