Filter
Top Products
Installing and Operating AN/DC and ANH-8/DC Systems
2-28
312410-A Rev 00
Figure 2-21. Attaching the ANH-8/DC Earth Ground Cable
10.
Before qualified service personnel connect the ANH-8/DC to the power
source, verify that the power switch is OFF and that the ANH-8/DC has
been properly grounded.
Danger:
Once the ANH-8/DC is connected to the power source, do not
remove the input wires. You must disconnect from the power source before
removing the ANH-8/DC power input wires.
RTN -VDC
AN0095A
Earth Ground Options
-48VDC
-60VDC
1.5A