Nortel Networks AN/DC Network Card User Manual


 
Operating the AN/DC and ANH-8/DC
312410-A Rev 00
4-9
Figure 4-4. AN/DC Power Switch
Figure 4-5. ANH-8/DC Power Switch
2.
Verify that air is flowing by placing your hand to the side of the fan vents.
To power off, press the switch to the Off position (0); toggle the switch up.
Note:
If you cannot feel air flow from the vents, and the POWER and DIAG
LEDs do not light or the DIAG LED does not turn off, turn the power switch to
the OFF position. Wait one minute and then turn the power switch to the ON
position. If the problem persists, contact the Nortel Networks Technical
Response Center.
COM 1
U
L
U
L
AN0091A
RTN -VDC
-48VDC
-60VDC
1.5A
Power switch OFF (0)
COM 1
COM 2COM 3/Expasion
Power switch
AN0054A