Nortel Networks AN/DC Network Card User Manual


 
Starting the AN/DC and ANH-8/DC
312410-A Rev 00
3-7
Figure 3-4. Running Diagnostics
5.
Before diagnostics are complete, simultaneously hold down the control
and
c
keys to bypass the automatic boot process.
The AN Diagnostics login prompt appears. Refer to the top half of the screen
in Figure 3-5
.
Note:
Be sure to press Control-c before the diagnostic tests complete. To
display the AN Diagnostics login prompt, you must interrupt the power-up
sequence before the AN/DC or ANH-8/DC boots.
AN Diagnostics: Version - 7.xx - Wed Aug 30 16:29:38 EDT 1996
MOD ID = 0x41A (1050) Rev = 0x00 (00) S/N = 0xxxxxxxxx
Flash Card instal Memory = xMB
TYPE "?" or "h" for HELP
Test Description Status
TEST 001 SNPROM Checksum Test -------------------- PASSED
TEST 002 DIAG PROM Checksum Test ----------------- PASSED
TEST 003 OS PROM Checksum Test ------------------- PASSED
TEST 004 Memory Alignment Test ------------------- PASSED
TEST 005 Control Register 0 Test ----------------- PASSED
TEST 006 Control Register 1 Test ----------------- PASSED
TEST 007 Control Register 2 Test ----------------- PASSED
TEST 008 Control Register 5 Test ----------------- PASSED
TEST 009 Sts Registers Test ---------------------- PASSED
TEST 00A EEPROM Test (5 msec per byte write)------ BYPASS
TEST 00B Novram Battery Check -------------------- PASSED
.
.
.
AN0062A