Filter
Top Products
Installing the AN/DC
312410-A Rev 00
1-3
Figure 1-2. Console Cables
Supplying Tools and Equipment
You may need items that are not part of the ANH-8/DC shipping accessories.
Before installing the ANH-8/DC hardware, ensure that you have all the cables,
tools, and other equipment that you need at your site.
Tools
Gather the tools that you will need to set up an AN/DC at your site, such as:
• Flathead screwdriver, for attaching network cables
• Phillips screwdriver, for attaching brackets to rack- or wall-mount the AN/DC
• Electric drill, if you intend to mount the AN/DC on a wall
Cables
Unless they were specifically ordered, the Ethernet and synchronous cables
necessary for your network configuration are not part of the AN/DC shipping
accessories. If you do not have the proper cables, contact your network
administrator or see the Cable Guide for Routers and BNX Platforms.
For connecting an optional terminal
or modem to the console service port
DB-9 receptacle
to DB-25 plug
serial cable
DB-25 receptacle
null nodem adapter
AN0002A