Filter
Top Products
Using Local Boot (the Quick-Start Procedure)
312410-A Rev 00
B-3
Global Information Worksheet
This section contains the prompts and possible options relating to all AN/ANH
synchronous configurations. Write your selection in the “Your Response” column.
Global Information Worksheet
Step Requested Information Options Your Response
1
Specify the slot number where
the Link Module resides.
Because the AN/DC and
ANH-8/DC is not a Link Module,
the script bypasses this step and
automatically accepts a default
slot of “1.”
None.
2
Specify the Link Module and
network interface information
for the initial IP connection
to Site Manager.
The script automatically provides a
representative letter code. The
network interface options are
— Ethernet
— Synchronous
Select
S
, the letter associated with
the synchronous interface.
Enter connector number [1]:
1. COM1
2. COM2
3. COM3
Enter clock source number [2]:
1. Internal
2. External
Enter circuit name [S#]:
The script recommends a circuit
name for the COM interface that
you select (for example, S11 for
COM1 and S12 for COM2).
Press the Return
key.
(continued)