Filter
Top Products
9 • Maintaining and Updating
9 - 10 SV62207 Rev. B
This exposes the print-
head cover.
6. Grasp the printhead
cover a
nd pull as shown
here.
7. Grasp the printhead
st
and-off and lift the
printhead up and out.
8. Discard the old print-
head.
9. Locate the new print-
head and remove the
pro
tective cover.
10. Install the new printhead
in
the printhead slot.
11. Close the printhead
cover a
nd push the print-
head latch back until you
hea
r it click into place.
12. Close the main cover.
Printhead Cover
Printhead Standoff