Filter
Top Products
DM925™ Digital Mailing System Operating Guide
SV62207 Rev. B 9 - 11
Changing the
Wiper Blade
Assembly
When you change the printhead, you must also replace the wiper blade
assembly.
Instructions for replacing the wiper bla
de assembly are included with each
replacement and are repeated here for your convenience.
1. From the IntelliLink® Control Center, press the Menu key
.
2. Select Mainten
ance.
3. Select Repl
ace Wiper Blade Assembly.
The “Preparing Wiper Blade” screen appears. During this time, the sys-
tem moves the printhead assembly back so that you can access the
wipe
r blade assembly.
4. Lift the main cover and
locate the wiper blade
assembly
.
5. Locate the small black
le
ver behind and next to
the wiper assembly.
6. Push the lever to the
rea
r of the machine to
release the wiper.
Wiper blade assembly