Filter
Top Products
5 • Mailing System Setup
5-32 SV62207 Rev. B
Setting
Auto-Enter
You can set up your system so that after it scans in a barcode value and
displays it on the IntelliLink® Control Center screen, it requires you to press
the Enter key to accept that value. You can do this if you want to be sure
that an operator verifies that the correct barcode has been scanned. By
default, the system will automatically enter the value as soon as it scans in
the barcode.
To require you to press Enter to accept each scan:
1. Press the Men
u key on the control center, then select Set Up.
2. Press the down arrow key and then select Barcode Sca
nner.
3. At the "Barcod
e Scanner Setup" menu, select Auto-enter.
4. Select Off to d
isable the Auto-enter. This will now require you to manu-
ally press the Enter key af
ter each scan.