Filter
Top Products
5 • Mailing System Setup
5-8 SV62207 Rev. B
Scale/Rates:
Autoscale
You can set AutoScale to On or Off.
Select On to
enable the AutoScale feature. When a mail piece is placed on
the scale it will automatically weigh and rate the mail piece.
Select Off to d
isable this feature. If you disable this feature and your sys-
tem has an attached scale, you need to select the Attached Scale mode
when
running mail if you want your system to weigh the mail and calculate
postage. Refer to Selecting the Postage Mode and Running the Mail in
Chapter 4 of this guide.
1. Press the Menu key on the contro
l center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select AutoScale to to
ggle between On and Off.
Scale/Rates:
Carrier/Class
Display
Use this option to control how the carrier and class are displayed on the
Main screen.
1. Press the Menu key on the contro
l center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Carrier/Class Dis
p.
• Select Clas
s Only if you only want the class to display on the Main
screen.
• Select Concatenate Carrier and Class if you want
the carrier and
class to display on the main screen. I
Scale/Rates:
Class if New
Piece
Use this option to set the system to prompt you to select a new class for
each piece of mail weighed or to keep the last class used.
1. Press the Menu key on the contro
l center and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Clas
s if new Piece.
• To clear the class information select Prompt: Sele
ct New Class.
• To retain the class information select Re
tain: Use Previous Class.
3. The system returns to the Scale/Rates Set Up menu.
Scale/Rates:
Destination if
New Piece
Use this option to set the system to prompt you to select a new destination
(ZIP, Zone code or country) for each piece of mail weighed, or to keep the
last destination used.
Press the Men
u key on the control center and select Set Up. Press the
down arrow key and select Scale/Rates.
1. Select Des
t. if new Piece.
• To clear the destination select Prompt: Ente
r New Destination.
• To retain the destination select Ret
ain: Use Class Destination.
2. The system returns to the Scale/Rates Set Up menu.
NOTE: If you select this option the carrier and class name will be
concatenated, or broken out onto multiple lines.