Filter
Top Products
5 • Mailing System Setup
5-4 SV62207 Rev. B
Setting the
Display
La
nguage
Depending on the model of your mailing system, you may be able to set the
display to any of the following languages:
• English
• Espanol
To change the language of the display:
1. Press the Men
u key.
2. Select Set Up, or press 1 and
the Enter key.
3. Select Chan
ge Language, or press 4 and the Enter key.
4. Select the language you want to appear in the display.
•Press 1 f
or English.
•Press 2
for Espanol.
5. Press the Enter key
.
Adjusting
Display
Contrast
You can adjust the contrast of your display and set the volume (1D00 only)
of the speaker on your mailing system.
To adjust the contrast level of your display:
1. Press the Men
u Key.
2. Press the down arrow key and then select Adjust Displa
y Contrast, or
press ? and the Enter key
3. Use the left or right arrow keys on the control center to select the con-
trast (1 - 9) you want. The screen updates to the new setting.
4. Press the Enter key to save
this setting.
Adjusting
the Feeder
Deck
Se
nsor
The feeder deck sensitivity adjustments improve mail piece sensing capa-
bilities on DM925™ mailing systems, eliminating the need to press down
on
the hopper mail stack to activate the feeder.
1. Press the Men
u Key.
2. Press the down arrow key and then select Adjust Fe
eder Deck
Sensor.
• Press the right arrow key to view specific instructions about sensi-
tivity adjustments.
• Select In
crease by 1 to increase the sensitivity of the Hopper Sen-
sor.
• Select Decrea
se by 1 to decrease the sensitivity of the Hopper
Sensor.
• Select Return to
Factory Default to set the Hopper Sensor to the
default setting.
3. Press the Enter when do
ne.
1
2
3