Filter
Top Products
SN0054621-00 E A-1
A Port- and HBA-level
Parameters
The tables in this appendix list the following types of SANsurfer iSCSI HBA CLI
parameters:
Port-level Parameters
HBA-level Parameters (see page A-10)
Port-level Parameters
Table A-1 lists the HBA port firmware parameters and their values. To view all
parameters, both configurable and non-configurable (read-only), use the -c
option in non-interactive mode. To edit configurable parameters, use the -n option
in non-interactive mode.
NOTE:
The parameters in this table are sorted alphabetically for ease of use.
Table A-1. Port Settings
Parameter Value Alias Description
AFW_AutoConnect on, off AFWC When on, the HBA will not try to autoconnect to
the configured targets at boot time. Instead, the
host must issue Set Device Database Entry
commands (0063h) to establish connections to
targets.
AFW_Delayed_Ack on, off AFDACK Determines what occurs when the HBA receives
a Data-In PDU with the Final bit set and no sta-
tus reported. When on, the HBA sends a TCP
acknowledgment immediately (this is the default
value). When this parameter is off, the HBA
delays the acknowledgment and waits for more
data.
AFW_Device_Timeout on, off AFWDT When on, the HBA firmware ignores the IOCB
command timeout values specified by the host.