Filter
Top Products
4 – Interactive Mode Commands
Port Level Info & Operations Menu
4-26 SN0054621-00 E
S
Configure Basic Settings
Select the Configure Basic Settings option to modify the following settings
(listed here in alphabetic order):
ENABLE_4022IPv4
ENABLE_IPv4
ENABLE_IPv6
IP_Address
IP_Gateway
IP_Subnet_Mask
IPv6_Addr_Local_Link
iSCSI_Alias
iSCSI_Discovery_Logout
iSCSI_Strict_Login
LDROUTER_AUTO
LOC_LINK_AUTO
ROUTABLE_AUTO
Task_Management_Timeout
TCP_DHCP
TCP_Nagle
Each setting is displayed with the current value in brackets, for example:
Task_Management_Timeout [10] :
To change the value, type the new value after the prompt. To keep the current
value, press ENTER at the prompt. SANsurfer iSCSI HBA CLI displays the next
device setting. The settings are displayed one by one (but not alphabetically, as in
the preceding bullet list).
Table A-1 on page A-1 describes these settings.
Configure Advanced Settings
Select the Configure Advanced Settings option to modify the following settings
(listed here in alphabetic order):
AFW_AutoConnect
AFW_Delayed_Ack
AFW_Device_Timeout
AFW_Serlz_Task_Mngmt
ExeThrottle
FirstBurstLen
Force_Negotiate_Main_iSCSI_Keys
FW_ZIO_Enable_Mode
IP_ARP_Redirect
IPv4_TOS_Enable
IPv4TOS
IPv4TTL