Filter
Top Products
5 – Non-Interactive Mode Commands
Non-interactive Commands
SN0054621-00 E 5-7
A
For information on the interactive version of this command, see “Install HBA
Driver, All Adapters (CLI Option -d)” on page 4-11.
-dc
(Display Destination Cache [IPv6 only])
The IPv6 destination cache contains the IP address, next-hop IP address, and
path MTU information about both local and remote destinations. For multicast and
on-link unicast destinations, the next-hop IP address always matches the
destination IP address. For unicast destinations that are off-link, the next hop IP
address is the IP address of the router.
To display the destination cache, enter the -dc command as follows:
-dc <hba_port_inst>
For information on the interactive version of this command, see “Display
Destination Cache (IPv6) (CLI Option -dc)” on page 4-33.
-dce
To display the connection error logs for up to 100 latest connections, enter the
-dce command as follows:
-dce <hba_port_inst> <target_id> <filename>
If <hba_port_inst> and <target_id> are not specified, all entries for all HBA
ports will be displayed. If <filename> is specified, then the log will be written to
that file.
-defbidi
(Add a Default BIDI CHAP)
To add a default BIDI (bidirectional) CHAP entry to the specified HBA port, enter
the -defbidi command as follows:
-defbidi <hba_port_inst> <CHAP Secret>
Issuing this command resets the HBA.
For information on the interactive version of this command, see “Add a Default
BIDI CHAP (CLI Option -defbidi)” on page 4-43.
-delchap
(Delete a CHAP Entry)
To delete the specified CHAP entry, enter the -delchap command as follows:
-delchap <hba_port_inst> <CHAP>
Issuing this command resets the HBA.
For information on the interactive version of this command, “Delete a CHAP Entry
(CLI Option -delchap)” on page 4-44.