Q-Logic SN0054621-00 E Network Card User Manual


 
C – Target Parameters
C-2 SN0054621-00 E
S
Table C-1. Target Parameters
Parameter Alias Function Value
IPv4TOS IPV4TOS When the DDB entry is for an
IPv6 device (the IPv6 Device
bit—Options field bit 8—is
set), this field specifies the
IPv6 TC field to be used in
the IPv6 TCP packets trans-
mitted from the firmware to
the device. When the DDB
entry is for an IPv4 device
(the IPv6 Device bit is reset),
this field specifies the value
of the TOS field to be used in
the IPv4 TCP packets
0–255
IIPv4TTL IPV4TTL Time-to-Live (in hops). Each
router decrements TTL
before transmitting it. Router
discards the datagram when
TTL = zero.
0–255
TGT_4022_Delayed_Ack TGT4022DACK Target QLA4022 delayed
acknowledgement
on/off
TGT_DDB_IPv6 TGT_DDB_IPv6 Target device database IPv6 on/off
TGT_DefaultTimeout TGTDTO Target default timeout
2
TGT_DefaultTime2Retain Target default time to retain
20*
TGT_DevType Target device type
0*
TGT_DIF_Enable TGTDIFFEN_IPv6 Target DIF enable on/off
TGT_ExeCount Target execution count
0*
TGT_ExeThrottle TGTET Target execution throttle
64
TGT_FirstBurstLen TGTFB Target first burst length
256
T
GT_Force_Negotiate_Main_iSCSI_
Keys
TGTFNMIK Target forces negotiation on/off
TGT_InitiatorSessID TGTISID Target initiator session ID
TGT_IPv6_Address Target IPv6 address IPv6
TGT_IPv6_Flow_Label TGTFLWLBL Target IPv6 flow label
TGT_IPv6_iSCSI_Name TGTINAME_IPv6 Target IPv6 iSCSI name