Filter
Top Products
4 – Interactive Mode Commands
Port Level Info & Operations Menu
4-24 SN0054621-00 E
S
Basic settings for instance 0
Advanced settings for instance 0
Edit a Specific Port Setting
Use the Edit a Specific Port Setting option when you know the name and
parameters of the settings you want to change. For a list of parameter names and
values, refer to Appendix A Port- and HBA-level Parameters. All of these
parameters are also available in the following options from the Port Firmware
Settings Menu:
“Configure iSCSI Settings (CLI Options -n and -nh)” on page 4-24
“Configure Firmware Settings” on page 4-25
“Configure Device Settings” on page 4-25
“Configure Basic Settings” on page 4-26
“Configure Advanced Settings” on page 4-26
To edit specific HBA settings:
1. At the following prompt, type the name of the parameter you want to change:
Enter the HBA parameter to modify:
2. At the following prompt, type the new value:
Enter the HBA parameter value:
The following prompt re-displays:
Enter the HBA parameter to modify:
3. To modify another parameter, repeat the preceding steps 1 and 2.
4. When you are done, press ENTER to return to the Port Firmware Settings
Menu.
Configure iSCSI Settings
(CLI Options -n and -nh)
Use the Configure iSCSI Settings menu to modify the following HBA iSCSI
settings:
Force_Negotiate_Main_iSCSI_Keys
iSCSI_Header_Digests
iSCSI_Data_Digests
iSCSI_Immediate_Data
iSCSI_Initial_R2T
iSCSI_Snack
iSCSI_Discovery_Logout
iSCSI_Strict_Login
iSCSI_Alias