Filter
Top Products
SN0054621-00 E D-1
D Error Codes
This appendix provides the error codes for both CLI modes, interactive and
non-interactive.
Interactive Mode Error Codes
Table D-1 lists the return, name, and description for each interactive mode error
code.
NOTE:
The return codes in this table are sorted numerically for ease of use.
Table D-1. Interactive-Mode Error Code Descriptions
Return Name Description
0 CORE_STATUS_GOOD Success
100 CORE_ERR_INV Invalid parameter: use -h switch to see proper
usage.
101 CORE_ERR_MEM_FAIL Failed to allocate memory error.
102 CORE_ERR_SDM_FAIL A call to the SDM Library failed.
103 CORE_ERR_NO_HBA HBA instance specified is invalid.
104 CORE_ERR_HBAOPEN Failed to open the HBA for an operation.
105 CORE_ERR_SAVE_INITFW Failed to save the INITFW settings to the HBA.
106 CORE_ERR_HBARESET Failure resetting the HBA.
107 CORE_ERR_RO_PARAM Cannot change a read-only parameter.
108 CORE_ERR_MISSING_PARAM A required parameter was missing.
109 CORE_ERR_FWUPD An error occurred updating the firmware.
110 CORE_ERR_INVFILE The file name entered is invalid or does not
exist.