Filter
Top Products
SN0054621-00 E 2-1
2 Installation and Removal
This section provides procedures for the following:
“Installing SANsurfer iSCSI HBA CLI” on page 2-1
“Removing SANsurfer iSCSI HBA CLI” on page 2-12
Before you can run SANsurfer iSCSI HBA CLI, ensure that your system meets the
following requirements:
HBAs are installed.
HBA drivers are installed.
To install SANsurfer iSCSI HBA CLI, the PC hard disk must have about 1
MB free space.
Installing SANsurfer iSCSI HBA CLI
This section on SANsurfer iSCSI HBA CLI installation includes the following
information:
“Downloading the Installation Package” on page 2-1
“Installing on Microsoft Windows” on page 2-4
“Installing on Red Hat/SUSE Linux/PPC” on page 2-10
“Installing on Solaris SPARC/Solaris x86” on page 2-10
Downloading the Installation Package
Follow the procedure in this section to download the SANsurfer iSCSI HBA CLI
installation package from the QLogic Web site.
To download the installation package:
1. From the QLogic home page (www.qlogic.com
), click Downloads.
2. Select your HBA.
NOTE:
SANsurfer iSCSI HBA CLI is designed to configure QLogic HBAs on the
local machine (where it is installed). It cannot configure HBAs on remote
machines.