Filter
Top Products
4 – Interactive Mode Commands
Port Level Info & Operations Menu
4-32 SN0054621-00 E
S
3. Type the number corresponding to the data pattern you want, and then
press ENTER.
4. If you want to stop the loopback test if an error occurs, type y for the Stop
on error[Y]? option.
After the test is done, the number of failed tests and successful tests are
shown.
Display Port Statistics
(CLI Option -stat)
When you select the Display Port Statistics option, the HBA statistical
information is displayed for the current HBA. For a list of the HBA statistics, see
Appendix B HBA Statistics.
Reset Statistics
(CLI Option -sreset)
When you select the Reset Statistics option, the HBA port statistics counters are
immediately reset.
Display ARP Table
(CLI Option -arp)
Select the Display ARP Table option to view the Address Resolution Protocol
(ARP) cache, which keeps a record of host port connections with other hardware
(such as targets) on the network. The IP address/MAC address pairs are dynamic
entries that are removed after 10 minutes.
Display Connection Error Log
Select the Display Connection Error Log to view the error log for each HBA
connection. For example:
inst 0 Number of entries = 0xd (13)
=======================
inst 0 Entry Index: 0
=======================
Delta Time (in seconds) : 0.000
Timestamp (or seconds) : Wed May 28, 2008 11:05:41 AM
Target ID : 2
Original State : Logged in (0x25)
Entry Type : Sense data (0x4)
Error Type : Removable medium changed or the target has been reset
(0x6)
Detail Code :
power on, reset, or bus device reset occurred (0x2900)
Number Consecutive Errors: 1
and so on.