Filter
Top Products
4 – Interactive Mode Commands
Port Level Info & Operations Menu
SN0054621-00 E 4-43
A
Add a Default BIDI CHAP
(CLI Option -defbidi)
A default bidirectional (BIDI) CHAP causes the HBA to authenticate only the
CHAP secrets of all targets with CHAP (the CHAP names are ignored). In
addition, the CHAP names of any bidirectional CHAP entries are ignored.
To add a default BIDI CHAP:
1. On the HBA CHAP Menu, type 5 (Add a Default BIDI CHAP), and then
press ENTER.
2. At the CHAPSecret [default secret] prompt, do one of the following:
Type the name of an existing CHAP secret you want to use, and then
press ENTER.
To use the default secret displayed in the prompt, press ENTER.
3. At the Press the Enter key to continue prompt, press ENTER.
You can add a BIDI CHAP entry with the -defbibi command. See “-defbidi (Add a
Default BIDI CHAP)” on page 5-7.
Edit a CHAP Entry
(CLI Option -edchap)
To edit a CHAP entry:
1. On the HBA CHAP Menu, type 6 (Edit a CHAP entry), and then press
ENTER.
The CHAP table is displayed.
2. Press ENTER.
3. At the prompt, type the number of the CHAP entry you want to change, and
then press ENTER.
4. At the CHAPName [default name] prompt, do one of the following:
Type a new CHAP name, and then press ENTER.
To use the default CHAP name shown in the prompt, press ENTER.
5. At the CHAPSecret [default name] prompt, do one of the following:
Type a new CHAP secret, and then press ENTER.
To use the default CHAP secret shown in the prompt, and then press
ENTER.
6. At the CHAPBidi [off or on] prompt, do one of the following:
If you want the HBA to authenticate the target (bidirectional CHAP)
and the prompt is CHAPBidi [off], type on, and then press ENTER.
If the prompt is CHAPBidi [on], press ENTER.