Filter
Top Products
4 – Interactive Mode Commands
SN0054621-00 E 4-7
A
10. Target Discovery Menu (see page 4-44)
1. Display Send Targets (see page 4-45)
2. Display Discovered Targets (see page 4-45)
3. Add a Send Target (see page 4-45)
4. Mark Send Target for Re-discovery (see page 4-45)
5. Remove a Send Target (see page 4-46)
6. Login and persist a discovered target (see page 4-46)
7. Duplicate a Persistent Target (see page 4-46)
8. Duplicate a Discovered Target (see page 4-46)
9. Remove Discovered Target (see page 4-46)
10. Display iSNS Settings (see page 4-46)
11. Configure iSNS (see page 4-46)
12. Save changes and reset HBA (see page 4-18)
13. Select HBA Port (see page 4-50)
14. Refresh (see page 4-50)
15. Exit (see page 4-50)
11. List LUN Information (see page 4-47)
12. Save Target/CHAP Changes (see page 4-47)
13. Select HBA Port (see page 4-49)
14. Refresh (see page 4-49)
15. Exit (see page 4-50
)
8. Select HBA Port (see page 4-49)
9. Refresh (see page 4-49)
10. Exit
(see
page 4-50)
5. List All QLogic iSCSI HBA Ports Detected (see page 4-48)
6. Help (see page 4-49)
7. Select HBA Port (see page 4-49)
8. Refresh (see page 4-49)
9. Exit
(see page 4-50)
Table 4-1. Command Line Interface Menu (Continued)
Level 1 Level 2 Level 3 Level 4