Filter
Top Products
4 – Interactive Mode Commands
Port Level Info & Operations Menu
SN0054621-00 E 4-27
A
IPv6_DAD_Count
IPv6_Hop_Limit
IPv6_MCast_Listnr_Disco_Enable
IPv6_ND_Reachable_Timer
IPv6_ND_Retransmit_Timer
IPv6_ND_Stale_Timeout
IPv6_TCP_Time_Stamp
IPv6_TCP_Window_Scale
IPv6_Traffic_Class
IPv6_VLAN_Enable
IPv6_VLAN_ID
IPv6_VLAN_User_Priority
iSCSI_Data_Digests
iSCSI_Header_Digests
iSCSI_Immediate_Data
iSCSI_Initial_R2T
iSCSI_Name
KeepAliveTO
Large_Frames
MaxBurstLen
MaxOutstandingR2T
TCP_Time_Stamp
TCP_Window_Scale
VLAN_Enable
VLAN_ID
VLAN_User_Priority
ZIO
Each setting is displayed with the current value in brackets, for example:
KeepAliveTO [30] :
To change the value, type the new value after the prompt. To keep the current
value, press ENTER at the prompt. The next setting appears. The settings are
displayed one by one (but not alphabetically, as in the preceding bullet list).
Table A-1 on page A-1 describes these settings.
Configure IPv6 Settings
(CLI Options -netconf, -netconf6, -isns, -isns6, -ip, and -nc)
When you select the Configure IPv6 Settings option, SANsurfer iSCSI HBA CLI
shows each current IPv6 setting and gives you the option of entering another:
IPv6_Addr_Local_Link [fe80:2c0:ddff:fe08:e6f6] :_
IPv6_Addr_Routable0 [3ffe:4032:1077:2006:2c0:ddff:fe08:e6f6} :_
IPv6_Addr_Routable1 [::] :_
Default_IPv6_Router [fe80:20d:29ff:fe24:713f] :_