Filter
Top Products
SANsurfer iSCSI HBA CLI User’s Guide
Command Line Interface for QLogic iSCSI Host Bus Adapters
SN0054621-00 E Page iii
S
Updated (added and removed parameters) the list
of device settings.
“Configure Device Settings” on page 4-25
Updated (added and removed parameters) the list
of basic settings.
“Configure Basic Settings” on page 4-26
Updated (added and removed parameters) the list
of advanced settings.
“Configure Advanced Settings” on page 4-26
Changed Bootcode Settings Menu to new
BIOS/UEFI (or FCode) Settings Menu.
“BIOS/UEFI [or FCode] Settings Menu” on
page 4-34
Removed Unbind Target option from Target
Level Info & Operations menu.
“Target Level Info & Operations” on page 4-36
Added more detail for Display Target Information
option.
“Display Target Information (CLI Option -t)” on
page 4-37
Added new Target Discovery Menu and its
options.
“Target Discovery Menu” on page 4-44
Removed subheadings referencing non-existent
interactive mode commands.
5 Non-Interactive Mode Commands
Added new miscellaneous command line options. “-acb” on page 5-3, “-dce” on page 5-7, “-dp” on
page 5-8,
Added new discovered target command line
options.
“-dtdsp (Display Discovered Targets)” on page 5-9
through “-dtrema (Remove Discovered Target)” on
page 5-11
Added new link configuration command line
options.
“-lc (Configure Link Configuration)” on page 5-18
and “-lcd (Display Configured Link Configuration)”
on page 5-18
Added other new target command line options. “-pad” on page 5-24, “-pdt” on page 5-24 and “-pet”
on page 5-24
Added unbind persistent target command line
options.
“-pu” on page 5-25 and “-px” on page 5-26
Added new send target and statistics command
line options.
“-stadd” on page 5-29 through “-strema” on
page 5-30
Added new port and HBA configuration parame-
ters (each in a separate table).
Added missing descriptions for parameters.
Deleted obsolete parameters.
Appendix A Port- and HBA-level Parameters