Filter
Top Products
SN0054621-00 E F-1
F Using Trace
Tracing can provide useful information to QLogic developers for identifying
application, HBA, and networking issues. For advanced users of SANsurfer iSCSI
HBA CLI, tracing may provide useful information about detailed steps that are
occurring for various operations.
To use trace:
1. To identify the directory in which to place the configuration file, follow these
steps:
a. Right-click the SANsurfer iSCSI HBA CLI Windows desktop icon.
b. Click Properties.
c. On the Shortcut page, click Find Target.
2. Go to the following directory:
C:\installed\pre-dvt-1.1.00.09
3. To activate trace, locate the iscli.cfg.txt file and rename it to
iscli.cfg.
4. Run SANsurfer iSCSI HBA CLI.
5. Modify the trace variables, levels, and data as described in the following
sections.
“Trace Variables” on page F-2
“Trace Level” on page F-2
“Trace Data” on page F-4
6. Run SANsurfer iSCSI HBA CLI again.
You can control tracing by putting an iscli.cfg file in the location of the
SANsurfer iSCSI HBA CLI executable module or in a working directory.