Filter
Top Products
5 – Non-Interactive Mode Commands
Non-interactive Commands
5-14 SN0054621-00 E
S
-i
(List All QLogic iSCSI HBA Ports Detected)
Use the -i command to view a list of all detected HBA port instances (“ports”) in
the system. Each port instance (hba_port_inst) is identified by its number.
To view general HBA information, enter the -i command as follows:
-i [hba_port_inst]
When you use hba_port_inst, information for only that HBA port instance is
shown. When you do not use hba_port_inst, information for all ports in the
system is shown.
The following HBA (port) information is shown:
Item number (order in which ports were detected)
HBA number, that is, the number of this HBA in the detection process
HBA port number (0 or 1) for this HBA
Port instance number in the system (two-port HBAs appear twice)
Port Instance on the HBA
HBA model number (for example, QLA4010)
HBA serial number (for example, TFC0105C51704)
Firmware version (for example, 3.0.1.45)
Connection medium
IP address (IP address of the HBA port instance)
iSCSI name (HBA port iSCSI name; the QLogic default name or one you
assign)
Alias (HBA port instance iSCSI alias name that you assign)
Figure 5-1 shows how to read the display.
Figure 5-1 HBA Port Information
Item 0
HBA 0 (First HBA
detected in system)
Port 0 on this HBA
HBA Model Number
0. HBA: 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050C
HBA Port Instance 0
(First detected in system)